<div class="phx-topic abstract-wrapper">With month-long rail issues at Vancouver and Prince Rupert continuing, beneficial cargo owners shipping through the Canadian ports must now contend with vessel arrival delays of as much as two weeks.</div>

With month-long rail issues at Vancouver and Prince Rupert continuing, beneficial cargo owners shipping through the Canadian ports must now contend with vessel arrival delays of as much as two weeks.

3641636_FI.png

<div>Shippers in the Pacific Northwest will face delays of up to two weeks on some trans-Pacific services to Vancouver and Prince Rupert in September, generated by port congestion and nagging <a>railcar shortages</a> at the Canadian gateways. Ocean Network Express (ONE) late last week confirmed in customer advisories that vessels in THE Alliance’s PN4 services to the Canadian gateways that had been scheduled to arrive last week and this week have been pushed back eight days to two weeks. Schedule disruptions are also taking place on the PN3 and PN1 services, according to the ONE customer advisory.Because some Pacific Northwest services...

Shippers in the Pacific Northwest will face delays of up to two weeks on some trans-Pacific services to Vancouver and Prince Rupert in September, generated by port congestion and nagging railcar shortages at the Canadian gateways. Ocean Network Express (ONE) late last week confirmed in customer advisories that vessels in THE Alliance’s PN4 services to the Canadian gateways that had been scheduled to arrive last week and this week have been pushed back eight days to two weeks. Schedule disruptions are also taking place on the PN3 and PN1 services, according to the ONE customer advisory. Because some Pacific Northwest services include calls at the Northwest Seaport Alliance of Seattle-Tacoma (NWSA), those ports will be caught up in the delays in Canada, but the US gateway is not experiencing congestion, an NWSA spokesperson said. The rail issues in Canada are tied to month-long dockworker strikes at the Port of Montreal that created a backlog of containers in Montreal and Halifax and tied up rail cars in eastern Canada. The Canadian National Railway’s ability to reposition intermodal rail cars to Canada’s Pacific Northwest ports was compromised, J.J. Ruest, CN’s president and CEO, told JOC.com last month. The Hyundai Brave, scheduled to call at Prince Rupert on Aug. 24, will now arrive on Sept. 2, according to the ONE customer advisory. That pushes back the call in Vancouver from Aug. 31 to Sept. 14. The Hyundai Tokyo, scheduled to arrive on Sept. 8, has been delayed until Sept. 21. A spokesperson for HMM told JOC.com that vessel departures from Asia have been set back by severe weather in Busan, South Korea. The voyages are being further delayed by congestion in Prince Rupert. Additional delays are expected in Vancouver in the coming weeks due to terminal congestion caused by the rail backup, the HMM spokesperson said. Also, some vessels arriving at Vancouver the past few weeks sat at anchor awaiting berthing space. “We’ve had a handful of container vessels go to anchor for a short period before going to berth,” said port spokesperson Arpen Rana, who added that high container volumes this summer are contributing to the congestion. Summer cargo surge compounds congestion problems Canada’s railcar shortages and port congestion come as the Pacific Northwest gateways are experiencing a spike in imports from Asia. July was Vancouver’s busiest month of the year so far, with 303,559 laden and empty TEU handled at Canada’s largest port. That was up from 275,171 TEU in June, according to the port’s website. Prince Rupert spokesperson Brian Friesen said cargo volumes have been exceptionally strong the past two months due to scheduled liner services and calls by extra-loader vessels. Vessels calling at Prince Rupert have been delayed by approximately one week on average in order to match inbound volume with terminal capacity and rail car supply, he said. However, CN is providing additional capacity to accommodate the volume surge, so railcar dwell times have returned to the normal two to three days. “We expect steady improvement to the vessel schedule through September, Friesen said. Railcar dwell times in Vancouver have been greater than usual over the past month. According to the port’s website , CN’s rail cars on Friday had an average dwell time of more than seven days at the Vanterm terminal, five to seven days at Centerm, three to five days at Deltaport, and up to three days at Fraser Surrey Docks. By comparison, rail container dwell times in Vancouver this spring were three days or less. An importer of home improvement products told JOC.com Monday his shipments through Prince Rupert have been slowed for five to eight days, experiencing both ocean and landside delays. Julia Kuzeljevich, public affairs manager at the Canadian International Freight Forwarders Association (CIFFA), said that despite the strong import demand and higher rail container dwell times on Canada’s Pacific Coast, CIFFA members have not expressed serious concerns. She said the elevated dwell times at Vancouver and Prince Rupert are expected to last into mid-September. Some Pacific Northwest services call in Seattle-Tacoma after leaving Canada. Vessels in those services have been off-schedule in recent weeks, said Northwest Seaport Alliance spokesperson Peter McGraw. “So far it hasn’t greatly impacted terminal operations, but some terminals are seeing a big spike in volume this week because of these off-proforma vessels,” McGraw said. Contact Bill Mongelluzzo at bill.mongelluzzo@ihsmarkit.com and follow him on Twitter: @billmongelluzzo .

International ports

PNW shippers face delays on Vancouver, Prince Rupert congestion

<div class="phx-topic abstract-wrapper">The $51.8 million cash deal includes Marten’s physical assets and the transfer of its existing contracts with food and beverage shippers. </div>

The $51.8 million cash deal includes Marten’s physical assets and the transfer of its existing contracts with food and beverage shippers.

Feature image

<div class="phx-topic">Hub Group has positioned itself to be among the largest temperature-controlled intermodal operators in the US, saying Tuesday it will acquire the reefer intermodal division of Marten Transport for $51.8 million in cash. Hub will add nearly 1,250 refrigerated containers to its existing fleet. “We are excited to more than double Hub Group’s temperature-controlled container fleet and leverage our existing intermodal network to serve Marten Intermodal’s customers,” Hub Group CEO Phil Yeager said in a statement. “We are committed to sustaining the strong service and growth momentum of our leading temperature-controlled intermodal offering.” The acquisition includes Marten’s physical assets and the transfer of its existing contracts with food and beverage shippers. The deal, expected to close by the end of the third quarter, means Illinois-based Hub will be roughly on par in the reefer intermodal space with Prime Inc., which operates a significant trucking fleet and owns about 2,200 refrigerated containers, according to data from Jason Hilsenbeck, president of Loadmatch.com, a drayage tracking platform. Hub owned a little more than 900 reefer containers before the Marten transaction. J.B. Hunt Transport Services remains the market leader in the temperature-controlled intermodal space with a refrigerated container fleet of about 4,700 boxes, more than twice the size of Hub and Prime. <h3>Risks in the reefer space </h3>Wisconsin-based Marten Transport, known for its refrigerated truckload business, will be leaving the intermodal space entirely. The decision reflects a broader industry trend driven in part by Class I railroads raising prices for trailer-on-flatcar loads, thus encouraging customers to shift toward containerized freight, which is easier to stack and lift at terminals. But containers also create operational challenges in the reefer space. Temperature-controlled containers are heavier than trailers due to the combined weight of the box, chassis, insulation and generator sets used to power the units. The additional weight results in fewer pallets being able to be legally loaded into a container than a truck trailer, particularly dense items like frozen foods. The capacity gap between trailers and containers has narrowed in recent years, but it remains a concern for shippers. For time-sensitive perishable products like produce or ice cream, trucking remains the faster, more reliable option. Despite those risks, Hub Group apparently sees an opportunity to expand its reach among food and beverage shippers and supplement its dry intermodal business with new refrigerated offerings. Contact Ari Ashe at <a href="mailto:ari.ashe@spglobal.com">ari.ashe@spglobal.com</a>. </div>

Hub Group has positioned itself to be among the largest temperature-controlled intermodal operators in the US, saying Tuesday it will acquire the reefer intermodal division of Marten Transport for $51.8 million in cash. Hub will add nearly 1,250 refrigerated containers to its existing fleet. “We are excited to more than double Hub Group’s temperature-controlled container fleet and leverage our existing intermodal network to serve Marten Intermodal’s customers,” Hub Group CEO Phil Yeager said in a statement. “We are committed to sustaining the strong service and growth momentum of our leading temperature-controlled intermodal offering.” The acquisition includes Marten’s physical assets and the transfer of its existing contracts with food and beverage shippers. The deal, expected to close by the end of the third quarter, means Illinois-based Hub will be roughly on par in the reefer intermodal space with Prime Inc., which operates a significant trucking fleet and owns about 2,200 refrigerated containers, according to data from Jason Hilsenbeck, president of Loadmatch.com, a drayage tracking platform. Hub owned a little more than 900 reefer containers before the Marten transaction. J.B. Hunt Transport Services remains the market leader in the temperature-controlled intermodal space with a refrigerated container fleet of about 4,700 boxes, more than twice the size of Hub and Prime. Risks in the reefer space Wisconsin-based Marten Transport, known for its refrigerated truckload business, will be leaving the intermodal space entirely. The decision reflects a broader industry trend driven in part by Class I railroads raising prices for trailer-on-flatcar loads, thus encouraging customers to shift toward containerized freight, which is easier to stack and lift at terminals. But containers also create operational challenges in the reefer space. Temperature-controlled containers are heavier than trailers due to the combined weight of the box, chassis, insulation and generator sets used to power the units. The additional weight results in fewer pallets being able to be legally loaded into a container than a truck trailer, particularly dense items like frozen foods. The capacity gap between trailers and containers has narrowed in recent years, but it remains a concern for shippers. For time-sensitive perishable products like produce or ice cream, trucking remains the faster, more reliable option. Despite those risks, Hub Group apparently sees an opportunity to expand its reach among food and beverage shippers and supplement its dry intermodal business with new refrigerated offerings. Contact Ari Ashe at ari.ashe@spglobal.com .

Surface

Intermodal providers

Cool Cargo News

Hub Group boosts reefer intermodal business with Marten acquisition

<div class="phx-topic abstract-wrapper">Consumer demand is driving container imports, but the weakening competitive position of European industry is directly impacting the integrated industrial cluster at the port.</div>

Consumer demand is driving container imports, but the weakening competitive position of European industry is directly impacting the integrated industrial cluster at the port.

<div class="phx-topic">Rotterdam faced “exceptional congestion” in the first half of the year as rising volumes — including the arrival of more than 100 ships with container exchanges of 12,000 TEUs — kept operations at the port under pressure, the Dutch hub said Tuesday. But a deeper concern for Rotterdam is the weakening competitive position of European industry that directly impacts the integrated industrial cluster of the port. “In recent months, we as a port have been confronted with economic uncertainties, lagging investments and disruptions in supply chains,” Boudewijn Siemons, CEO of the Port of Rotterdam Authority, said in a first-half results statement. The current investment climate in the Netherlands is causing companies to postpone or cancel investments, including those in sustainability, while at the same time production is increasing in countries outside Europe where conditions are more favorable, the port statement noted. “In these turbulent times, as a port we must ensure that the security of supply of energy, food and other essential materials in Europe remains guaranteed,” Siemons said. “It is also very important that industry in the port remains competitive so as not to weaken Europe’s strategic autonomy.” From a container shipping perspective, Rotterdam is back on top as first-half volume allowed it to reclaim its title as Europe’s busiest container port that was <a href="https://www.joc.com/article/strong-h1-volumes-space-crunch-keep-antwerp-terminals-under-pressure-6043917">lost for the first time to Antwerp-Bruges in the first quarter</a>. First-half volume increased 2.7% year over year to 7 million TEUs, driven by an 8.4% increase in imports from Asia to support growing European consumption and a 9.1% increase in trade with North America. <h3>Structural shortcomings exposed </h3>However, the increasing throughput and rising call sizes are exposing structural shortcomings in Rotterdam. Call size refers to the total number of containers loaded on and taken off a ship during a port call. “Solutions to make the entire system more efficient and resilient must be sought in structural cooperation within the chain,” the port statement said. “The arrival of more than 100 container ships with a call size exceeding 12,000 TEUs this half year underscores the urgency of the situation.” Handling the huge container flows and large call sizes in Rotterdam is coming on top of the phasing in and out of services in changing carrier alliances, labor interruptions and challenging weather conditions at the beginning of the year that have led to increasing waiting times on the land side of the deep-sea terminal operations. <div class="wrapper-narrow"><dynamic-object type="jocchartid" resource-id="a16621f7-4a3c-4aa5-bf93-8863f02dd57f"></dynamic-object></div>The congestion is mostly confined to the land side, with a limited number of large container ships waiting to berth. This was confirmed by data from port visibility provider Portcast that shows six ships waiting to berth at Rotterdam as of July 20. Low water levels on the Rhine and import duties imposed by the US on exports from Europe and China have not yet had “a demonstrable negative effect” on container handling in the first half of the year, according to the port. One of the structural changes being discussed in Rotterdam is the smarter use of existing infrastructure; for example, by shifting more road transport to off-peak hours, bundling and exchanging containers on inland waterway corridors and sharing data via digital platforms. <h3>Bulk shipments show sharp decline </h3>While Rotterdam works on improving container flows, concerns are growing over the weakening competitive position of European industry. As one of the main gateways to North Europe, that is having a direct impact on Rotterdam’s bulk handling volume, particularly liquid bulk. Several chemical companies have announced closures of plants in the Rotterdam area with the loss of hundreds of jobs, raising concerns about the future of the Dutch chemicals cluster. Rotterdam’s total liquid bulk segment declined 5.3% year over year in the first half to 96.2 million metric tons. The throughput of mineral oil products showed a decline of 21.5% to 6.2 million metric tons, with the port describing the market as being in “backwardation,” which makes storage unprofitable because the current spot price is higher than the product’s futures price. LNG was an outlier in the liquid bulk sector, with throughput increasing 9% as gas stocks in Europe continued to be replenished during the summer. But the volume of product categorized as “other liquid bulk cargo” fell 5.9% in the first half, mainly due to lower supplies of biodiesel from China because of anti-dumping duties and reduced use of palm oil as a raw material for biodiesel production in Europe. Throughput of dry bulk cargo fell 8.9% year over year in the first half. The volume of iron ore and scrap was down 12.2% because of lower production in the German steel industry that is influenced by ongoing economic uncertainty and trade restrictions. Coal throughput decreased 21.1% due to lower supplies of coking coal, which is used in blast furnaces for steel production. Contact Greg Knowler at <a href="mailto:greg.knowler@spglobal.com">greg.knowler@spglobal.com</a>. </div>

Rotterdam faced “exceptional congestion” in the first half of the year as rising volumes — including the arrival of more than 100 ships with container exchanges of 12,000 TEUs — kept operations at the port under pressure, the Dutch hub said Tuesday. But a deeper concern for Rotterdam is the weakening competitive position of European industry that directly impacts the integrated industrial cluster of the port. “In recent months, we as a port have been confronted with economic uncertainties, lagging investments and disruptions in supply chains,” Boudewijn Siemons, CEO of the Port of Rotterdam Authority, said in a first-half results statement. The current investment climate in the Netherlands is causing companies to postpone or cancel investments, including those in sustainability, while at the same time production is increasing in countries outside Europe where conditions are more favorable, the port statement noted. “In these turbulent times, as a port we must ensure that the security of supply of energy, food and other essential materials in Europe remains guaranteed,” Siemons said. “It is also very important that industry in the port remains competitive so as not to weaken Europe’s strategic autonomy.” From a container shipping perspective, Rotterdam is back on top as first-half volume allowed it to reclaim its title as Europe’s busiest container port that was lost for the first time to Antwerp-Bruges in the first quarter . First-half volume increased 2.7% year over year to 7 million TEUs, driven by an 8.4% increase in imports from Asia to support growing European consumption and a 9.1% increase in trade with North America. Structural shortcomings exposed However, the increasing throughput and rising call sizes are exposing structural shortcomings in Rotterdam. Call size refers to the total number of containers loaded on and taken off a ship during a port call. “Solutions to make the entire system more efficient and resilient must be sought in structural cooperation within the chain,” the port statement said. “The arrival of more than 100 container ships with a call size exceeding 12,000 TEUs this half year underscores the urgency of the situation.” Handling the huge container flows and large call sizes in Rotterdam is coming on top of the phasing in and out of services in changing carrier alliances, labor interruptions and challenging weather conditions at the beginning of the year that have led to increasing waiting times on the land side of the deep-sea terminal operations. The congestion is mostly confined to the land side, with a limited number of large container ships waiting to berth. This was confirmed by data from port visibility provider Portcast that shows six ships waiting to berth at Rotterdam as of July 20. Low water levels on the Rhine and import duties imposed by the US on exports from Europe and China have not yet had “a demonstrable negative effect” on container handling in the first half of the year, according to the port. One of the structural changes being discussed in Rotterdam is the smarter use of existing infrastructure; for example, by shifting more road transport to off-peak hours, bundling and exchanging containers on inland waterway corridors and sharing data via digital platforms. Bulk shipments show sharp decline While Rotterdam works on improving container flows, concerns are growing over the weakening competitive position of European industry. As one of the main gateways to North Europe, that is having a direct impact on Rotterdam’s bulk handling volume, particularly liquid bulk. Several chemical companies have announced closures of plants in the Rotterdam area with the loss of hundreds of jobs, raising concerns about the future of the Dutch chemicals cluster. Rotterdam’s total liquid bulk segment declined 5.3% year over year in the first half to 96.2 million metric tons. The throughput of mineral oil products showed a decline of 21.5% to 6.2 million metric tons, with the port describing the market as being in “backwardation,” which makes storage unprofitable because the current spot price is higher than the product’s futures price. LNG was an outlier in the liquid bulk sector, with throughput increasing 9% as gas stocks in Europe continued to be replenished during the summer. But the volume of product categorized as “other liquid bulk cargo” fell 5.9% in the first half, mainly due to lower supplies of biodiesel from China because of anti-dumping duties and reduced use of palm oil as a raw material for biodiesel production in Europe. Throughput of dry bulk cargo fell 8.9% year over year in the first half. The volume of iron ore and scrap was down 12.2% because of lower production in the German steel industry that is influenced by ongoing economic uncertainty and trade restrictions. Coal throughput decreased 21.1% due to lower supplies of coking coal, which is used in blast furnaces for steel production. Contact Greg Knowler at greg.knowler@spglobal.com .

Maritime

Container Shipping News

Port News

Port infrastructure

Flagging European industry clouds Rotterdam’s rising container volume

<div class="phx-topic abstract-wrapper">The largest US less-than-truckload provider says it won’t enforce new density-based classifications until Dec. 1, giving shippers more time to adapt to changes. </div>

The largest US less-than-truckload provider says it won’t enforce new density-based classifications until Dec. 1, giving shippers more time to adapt to changes.

<div class="phx-topic">FedEx Freight, the largest US less-than-truckload (LTL) carrier, is delaying by 150 days the implementation of changes to the shipment classification system used to set LTL pricing. The revisions to the National Motor Freight Classification (NMFC), which took effect Saturday, affect thousands of products, moving them to density-based classes. “To ensure ample time to fully adapt processes and pricing to the new classifications, FedEx Freight is delaying enforcement until Dec. 1,” the company said <a href="https://www.fedex.com/en-us/shipping/freight/class-calculator.html#nmfc">on its website</a>. No other LTL carriers have followed suit yet, but FedEx Freight is a large enough provider that the 150-day reprieve will impact thousands of US shippers. FedEx Freight has nearly 15% of the total US LTL market in terms of daily shipments, hauling about 98,900 shipments a day in 2024, according to SJ Consulting Group data. The trucking arm of FedEx had about $9.1 billion in revenue in calendar year 2024. The next largest LTL carrier, Old Dominion Freight Line, had $5.8 billion in revenue. <h3>Greater weight on density </h3>Shippers have been wrestling for much of the past year with <a href="https://www.joc.com/article/us-shippers-urged-to-prepare-now-for-upcoming-ltl-class-changes-rate-resetting-5933927">how to adjust and prepare for changes</a> that move more than 2,000 NMFC items into full-scale density classes. The National Motor Freight Traffic Association (NMFTA), which administers the NMFC, and LTL carriers have urged shippers to review how they build palletized shipments. With the revisions now in place, the question turns from whether shippers are ready to adapt to whether trucking companies are willing to implement them in a weak LTL market. Old Dominion Freight Line (ODFL) and XPO saw shipment volumes drop in May, with ODFL’s daily volume falling 6.8% year over year that month and XPO’s shipments slipping 5%, according to company reports. FedEx Freight’s shipment count fell 1% year over year in the quarter ending May 31. LTL pricing has remained resilient, however, with the US long-distance LTL producer price index (PPI) up 7.8% year over year in June at a reading of 261, its highest to date this year, according to the US Bureau of Labor Statistics. <div class="wrapper-narrow"><dynamic-object type="jocchartid" resource-id="2b531ac2-bb4f-4809-9a8a-81ad615a8698"></dynamic-object></div>Classification is a tool used to help determine pricing based on shipment characteristics by commodity including density, handling, stowability and liability. Density-based pricing considers the mass (pounds) and volume (cubic feet) of the load rather than other characteristics. The July 19 changes are only the beginning as the NMFTA continues to review nearly 20,000 commodity codes for additional changes in the future. <h3>Pricing impact </h3>Although there’s no set formula to show how much LTL rates might increase under the NMFC revisions, shippers have said they believe rates will rise — especially if they do nothing. With more products shifting to density-only classifications, shippers that move low-density items such as cabinets, chairs and foam that take up lots of trailer space may pay more. High density items such as ceramic tile, concrete bricks, or steel fasteners are likely to cost less to ship because they take up less space in the truck. The goal is to maximize the use of space inside the trailer with as many shipments from as many customers as possible, increasing daily productivity and reducing costs. The key to avoiding rate increases, experts say, is for shippers to provide exact weight and dimension data for palletized shipments on bills of lading. Inaccurate data or a lack of information could lead to repricing of freight or additional charges. FedEx Freight said after Dec. 1 it may apply an inspection surcharge for shipments with incomplete or inaccurate information listed on the bill of lading. Contact William B. Cassidy at <a href="mailto:bill.cassidy@spglobal.com">bill.cassidy@spglobal.com</a>. Senior Editor Ari Ashe contributed to this report. </div>

FedEx Freight, the largest US less-than-truckload (LTL) carrier, is delaying by 150 days the implementation of changes to the shipment classification system used to set LTL pricing. The revisions to the National Motor Freight Classification (NMFC), which took effect Saturday, affect thousands of products, moving them to density-based classes. “To ensure ample time to fully adapt processes and pricing to the new classifications, FedEx Freight is delaying enforcement until Dec. 1,” the company said on its website . No other LTL carriers have followed suit yet, but FedEx Freight is a large enough provider that the 150-day reprieve will impact thousands of US shippers. FedEx Freight has nearly 15% of the total US LTL market in terms of daily shipments, hauling about 98,900 shipments a day in 2024, according to SJ Consulting Group data. The trucking arm of FedEx had about $9.1 billion in revenue in calendar year 2024. The next largest LTL carrier, Old Dominion Freight Line, had $5.8 billion in revenue. Greater weight on density Shippers have been wrestling for much of the past year with how to adjust and prepare for changes that move more than 2,000 NMFC items into full-scale density classes. The National Motor Freight Traffic Association (NMFTA), which administers the NMFC, and LTL carriers have urged shippers to review how they build palletized shipments. With the revisions now in place, the question turns from whether shippers are ready to adapt to whether trucking companies are willing to implement them in a weak LTL market. Old Dominion Freight Line (ODFL) and XPO saw shipment volumes drop in May, with ODFL’s daily volume falling 6.8% year over year that month and XPO’s shipments slipping 5%, according to company reports. FedEx Freight’s shipment count fell 1% year over year in the quarter ending May 31. LTL pricing has remained resilient, however, with the US long-distance LTL producer price index (PPI) up 7.8% year over year in June at a reading of 261, its highest to date this year, according to the US Bureau of Labor Statistics. Classification is a tool used to help determine pricing based on shipment characteristics by commodity including density, handling, stowability and liability. Density-based pricing considers the mass (pounds) and volume (cubic feet) of the load rather than other characteristics. The July 19 changes are only the beginning as the NMFTA continues to review nearly 20,000 commodity codes for additional changes in the future. Pricing impact Although there’s no set formula to show how much LTL rates might increase under the NMFC revisions, shippers have said they believe rates will rise — especially if they do nothing. With more products shifting to density-only classifications, shippers that move low-density items such as cabinets, chairs and foam that take up lots of trailer space may pay more. High density items such as ceramic tile, concrete bricks, or steel fasteners are likely to cost less to ship because they take up less space in the truck. The goal is to maximize the use of space inside the trailer with as many shipments from as many customers as possible, increasing daily productivity and reducing costs. The key to avoiding rate increases, experts say, is for shippers to provide exact weight and dimension data for palletized shipments on bills of lading. Inaccurate data or a lack of information could lead to repricing of freight or additional charges. FedEx Freight said after Dec. 1 it may apply an inspection surcharge for shipments with incomplete or inaccurate information listed on the bill of lading. Contact William B. Cassidy at bill.cassidy@spglobal.com . Senior Editor Ari Ashe contributed to this report.

Trucking News

FedEx Freight delays enforcement of LTL re-classification

<div class="phx-topic abstract-wrapper">Double counting for US port calls on the same voyage would lead to an “unsustainable” cost impact on the company, the CEO of its US affiliate tells the Journal of Commerce.</div>

Double counting for US port calls on the same voyage would lead to an “unsustainable” cost impact on the company, the CEO of its US affiliate tells the Journal of Commerce.

<div class="phx-topic">Italy’s Grimaldi Lines could be forced to stop calling at US ports on some of its trans-Atlantic services if it is charged double port fees for US calls, the head of its US affiliate says. Some of the vessels operating in Grimaldi’s trans-Atlantic Mediterranean service call initially at US East Coast ports, then continue to ports in Mexico before returning to US ports on the backhaul leg to the Mediterranean. “Should the same vessel be subject to double fees when entering the US on a voyage, the impact would be unsustainable, and some US calls would have to be dropped,” Andrew Abbott, CEO of Grimaldi’s North Atlantic operation, Atlantic Container Line (ACL), told the Journal of Commerce. ACL itself could face hefty tonnage charges if its vessels are considered roll-on/roll-off (ro/ro) vessels under the latest US Trade Representative (USTR) car carrier proposals, even though almost 90% of its cargoes are containers or breakbulk. “Will we be considered a ro/ro carrier, when only 10% of our volume are cars or other rollable cargo? If so, we would be hit with enormous charges per voyage because the current proposal is based on net registered tons and not cargo carried,” Abbott said. ACL’s weekly cargo volumes between January and May show 80%, equivalent to 29,908 tons, was carried in containers, with a further 9%, or 3,490 tons, as breakbulk. The remaining 10% comprised 9% rollable equipment and 620 cars. It would be “logical” for ACL to be considered a container line given “89% of our cargo is containers or flat rack cargo,” Abbott said. If this was accepted by the USTR, ACL would not face port fees. <h3>ACL has questioned USTR classifications </h3>Abbott raised Grimaldi’s potential withdrawal and whether it and ACL should be classified as container lines in a letter to Trade Representative Jamieson Greer during the public comment period <a href="https://www.joc.com/article/ustr-plan-to-tax-roro-ships-exceeds-statutory-authority-stakeholders-6039721">on the fee proposal that closed on July 7</a>. This came after USTR amended proposals in June to charge all foreign-built ro/ro vessels a tonnage fee every time they entered US ports, rather than on a vessel’s net registered tonnage. To blur the issue further, Abbott highlighted PIERS data between January and May that showed container lines carried 27% of the total vehicle volumes on the trans-Atlantic trade between the US East Coast and Northern Europe. By comparison, pure vehicle carriers carried 65% of overall volumes. PIERS is a sister product of the Journal of Commerce within S&amp;P Global. Under current USTR proposals, container lines would not pay port charges, even carrying cars in containers, so long as the vessels were not built in China or Chinese-owned. “A more practical solution would be to assess any charges on the cargo lifted, no matter what type of vessel is employed, instead of the total capacity of the vessel,” Abbott said. <h3>Unintended consequences </h3>Other ro/ro and vehicle carrier operators highlighted in their own submissions to the USTR that current proposals target all non-US-built ro/ro ships, whereas other vessel types, including container ships and tankers, are only penalized if they are China-built or -operated. This discrepancy led some groups and companies to question whether USTR exceeded its remit in including all foreign-built ro/ro and vehicle carriers in its investigation of China’s dominance in the maritime, logistics and shipbuilding industries. Abbott said he’d yet to receive a response from USTR. “We are waiting for the final verdict and are expecting to see something coming out in an executive order before the end of this month,” he said. ACL has an extensive trans-Atlantic network linking East Coast ports in the US and Canada including New York, Baltimore, Norfolk and Halifax with European ports such as Antwerp, Hamburg, Liverpool and Dublin that is separate from Grimaldi’s services. “Hopefully USTR will recognize its proposal will have a major impact on the competitiveness of individual carriers, unintentionally letting Chinese carriers off the hook, while penalizing carriers with either US headquarters or US-flag vessels,” Abbott said. Contact Keith Wallis at <a href="mailto:keithwallis@hotmail.com">keithwallis@hotmail.com</a>. </div>

Italy’s Grimaldi Lines could be forced to stop calling at US ports on some of its trans-Atlantic services if it is charged double port fees for US calls, the head of its US affiliate says. Some of the vessels operating in Grimaldi’s trans-Atlantic Mediterranean service call initially at US East Coast ports, then continue to ports in Mexico before returning to US ports on the backhaul leg to the Mediterranean. “Should the same vessel be subject to double fees when entering the US on a voyage, the impact would be unsustainable, and some US calls would have to be dropped,” Andrew Abbott, CEO of Grimaldi’s North Atlantic operation, Atlantic Container Line (ACL), told the Journal of Commerce. ACL itself could face hefty tonnage charges if its vessels are considered roll-on/roll-off (ro/ro) vessels under the latest US Trade Representative (USTR) car carrier proposals, even though almost 90% of its cargoes are containers or breakbulk. “Will we be considered a ro/ro carrier, when only 10% of our volume are cars or other rollable cargo? If so, we would be hit with enormous charges per voyage because the current proposal is based on net registered tons and not cargo carried,” Abbott said. ACL’s weekly cargo volumes between January and May show 80%, equivalent to 29,908 tons, was carried in containers, with a further 9%, or 3,490 tons, as breakbulk. The remaining 10% comprised 9% rollable equipment and 620 cars. It would be “logical” for ACL to be considered a container line given “89% of our cargo is containers or flat rack cargo,” Abbott said. If this was accepted by the USTR, ACL would not face port fees. ACL has questioned USTR classifications Abbott raised Grimaldi’s potential withdrawal and whether it and ACL should be classified as container lines in a letter to Trade Representative Jamieson Greer during the public comment period on the fee proposal that closed on July 7 . This came after USTR amended proposals in June to charge all foreign-built ro/ro vessels a tonnage fee every time they entered US ports, rather than on a vessel’s net registered tonnage. To blur the issue further, Abbott highlighted PIERS data between January and May that showed container lines carried 27% of the total vehicle volumes on the trans-Atlantic trade between the US East Coast and Northern Europe. By comparison, pure vehicle carriers carried 65% of overall volumes. PIERS is a sister product of the Journal of Commerce within S&P Global. Under current USTR proposals, container lines would not pay port charges, even carrying cars in containers, so long as the vessels were not built in China or Chinese-owned. “A more practical solution would be to assess any charges on the cargo lifted, no matter what type of vessel is employed, instead of the total capacity of the vessel,” Abbott said. Unintended consequences Other ro/ro and vehicle carrier operators highlighted in their own submissions to the USTR that current proposals target all non-US-built ro/ro ships, whereas other vessel types, including container ships and tankers, are only penalized if they are China-built or -operated. This discrepancy led some groups and companies to question whether USTR exceeded its remit in including all foreign-built ro/ro and vehicle carriers in its investigation of China’s dominance in the maritime, logistics and shipbuilding industries. Abbott said he’d yet to receive a response from USTR. “We are waiting for the final verdict and are expecting to see something coming out in an executive order before the end of this month,” he said. ACL has an extensive trans-Atlantic network linking East Coast ports in the US and Canada including New York, Baltimore, Norfolk and Halifax with European ports such as Antwerp, Hamburg, Liverpool and Dublin that is separate from Grimaldi’s services. “Hopefully USTR will recognize its proposal will have a major impact on the competitiveness of individual carriers, unintentionally letting Chinese carriers off the hook, while penalizing carriers with either US headquarters or US-flag vessels,” Abbott said. Contact Keith Wallis at keithwallis@hotmail.com .

Ro/ro cargo

USTR’s ‘double-hit’ port fee proposal could force cuts to Grimaldi’s US calls

<div class="phx-topic abstract-wrapper">Any investment by the largest trucking scale network in North America gives Truck Parking Club capital to expand its list of partner parking facilities. </div>

Any investment by the largest trucking scale network in North America gives Truck Parking Club capital to expand its list of partner parking facilities.

<div class="phx-topic">The connection between an available parking space for a truck driver and adequate capacity for truckload shippers may not seem immediately obvious. But the direct impact of drivers finding space to park at the most favorable time to fully use their hours of service is clear to a company aiming to build the largest collection of bookable space for truckload drivers in North America. “It’s been up to drivers to make decisions on where to park, and that often means they’re stopping with five hours left to drive,” said Reed Loustalot, chief marketing officer at Truck Parking Club, which offers a platform for fleets and drivers to arrange parking spaces. “That’s lost efficiency, and [if] you add that up across the industry, that’s a lot of wasted hours.” Loustalot said it’s hard to quantify that inefficiency across a nearly $1 billion industry. But arming drivers with the ability to book a space ahead of time in a way that lets them maximize their driving time definitely benefits shippers, carriers, brokers and the drivers, he said. “It’s worth it for the carrier to provide drivers with $25 for a space,” he said. “The alternative is they stop a few hours short [of their hours of service limit] and waste everyone’s time.” Truck Parking Club, founded in 2022 by CEO Evan Shelley, has been steadily building its network of available and bookable spaces through its app. From barely more than 1,000 spaces in November, the company now has 2,300 and plans to hit 10,000 by the end of 2026. Locations include space at trucking companies, truck repair shops, tow truck companies, storage companies, truck driving schools, trailer leasing companies, real estate investors, truck parking operators and truck stops. “Our north star is getting more locations,” Loustalot said. “Drivers just say they want more locations from us, so every dollar in the business is about getting more locations and better service.” Earlier this month, Truck Parking Club tied up an undisclosed investment from CAT Scale, North America’s largest truck weighing network. The investment provides Truck Parking Club with capital to add more parking spots to the assortment it can offer drivers. Shelley also said in a statement “leveraging [CAT Scale’s] knowledge and experience from building a trusted nationwide network will be invaluable as we continue building our truck parking network.” <h3>Broader reach to drivers </h3>Truck Parking Club last week also announced an integration with Platform Science, a widely used electronic logging device (ELD) hardware maker. That integration expands the distribution of Truck Parking Club’s app by making it available directly in-cab through the Platform Science device that drivers use for a range of functions. “We had fleets say to us, ‘let us know when you’re in Platform Science,’” Loustalot said. The cooperation is not exclusive, meaning Truck Parking Club can pursue integrations with other ELD providers and truckload telematics platforms. In May, Truck Parking Club began <a href="https://www.joc.com/article/truckload-technology-providers-partner-on-cargo-theft-initiative-5996628">partnering with GenLogs</a> to battle cargo and equipment theft by connecting Truck Parking Club’s data on commercial vehicles and their movements with GenLogs’ network of roadside sensors that track equipment location. Aside from aiming to drive more available capacity in the market, there’s a more direct link to shippers. Loustalot said the company has been seeing a “good amount of activity from private fleets, primarily using us for storage, and especially for trailers.” Those fleets tend to have drivers moving local loads or facility-to-facility shipments, “so parking isn’t the biggest issue, but trailers and drop trailer storage is an issue,” he said. “They use us as external yard.” As Truck Parking Club’s footprint grows, it begs the question: Why has there been no centralized parking platform before, and why do many fleets hand off the responsibility for finding, and paying for, parking to their drivers? “There are fleets that pay for their drivers to park,” Loustalot said. “But there are a million reasons they don’t want to do it. Most big fleets rent space, but cutting checks is another issue, and it takes a day to find a place to stash trucks. Folks have thrown their hands up, especially fleets that don’t have lots of real estate.” Contact Eric Johnson at <a href="mailto:eric.johnson@spglobal.com">eric.johnson@spglobal.com</a>. </div>

The connection between an available parking space for a truck driver and adequate capacity for truckload shippers may not seem immediately obvious. But the direct impact of drivers finding space to park at the most favorable time to fully use their hours of service is clear to a company aiming to build the largest collection of bookable space for truckload drivers in North America. “It’s been up to drivers to make decisions on where to park, and that often means they’re stopping with five hours left to drive,” said Reed Loustalot, chief marketing officer at Truck Parking Club, which offers a platform for fleets and drivers to arrange parking spaces. “That’s lost efficiency, and [if] you add that up across the industry, that’s a lot of wasted hours.” Loustalot said it’s hard to quantify that inefficiency across a nearly $1 billion industry. But arming drivers with the ability to book a space ahead of time in a way that lets them maximize their driving time definitely benefits shippers, carriers, brokers and the drivers, he said. “It’s worth it for the carrier to provide drivers with $25 for a space,” he said. “The alternative is they stop a few hours short [of their hours of service limit] and waste everyone’s time.” Truck Parking Club, founded in 2022 by CEO Evan Shelley, has been steadily building its network of available and bookable spaces through its app. From barely more than 1,000 spaces in November, the company now has 2,300 and plans to hit 10,000 by the end of 2026. Locations include space at trucking companies, truck repair shops, tow truck companies, storage companies, truck driving schools, trailer leasing companies, real estate investors, truck parking operators and truck stops. “Our north star is getting more locations,” Loustalot said. “Drivers just say they want more locations from us, so every dollar in the business is about getting more locations and better service.” Earlier this month, Truck Parking Club tied up an undisclosed investment from CAT Scale, North America’s largest truck weighing network. The investment provides Truck Parking Club with capital to add more parking spots to the assortment it can offer drivers. Shelley also said in a statement “leveraging [CAT Scale’s] knowledge and experience from building a trusted nationwide network will be invaluable as we continue building our truck parking network.” Broader reach to drivers Truck Parking Club last week also announced an integration with Platform Science, a widely used electronic logging device (ELD) hardware maker. That integration expands the distribution of Truck Parking Club’s app by making it available directly in-cab through the Platform Science device that drivers use for a range of functions. “We had fleets say to us, ‘let us know when you’re in Platform Science,’” Loustalot said. The cooperation is not exclusive, meaning Truck Parking Club can pursue integrations with other ELD providers and truckload telematics platforms. In May, Truck Parking Club began partnering with GenLogs to battle cargo and equipment theft by connecting Truck Parking Club’s data on commercial vehicles and their movements with GenLogs’ network of roadside sensors that track equipment location. Aside from aiming to drive more available capacity in the market, there’s a more direct link to shippers. Loustalot said the company has been seeing a “good amount of activity from private fleets, primarily using us for storage, and especially for trailers.” Those fleets tend to have drivers moving local loads or facility-to-facility shipments, “so parking isn’t the biggest issue, but trailers and drop trailer storage is an issue,” he said. “They use us as external yard.” As Truck Parking Club’s footprint grows, it begs the question: Why has there been no centralized parking platform before, and why do many fleets hand off the responsibility for finding, and paying for, parking to their drivers? “There are fleets that pay for their drivers to park,” Loustalot said. “But there are a million reasons they don’t want to do it. Most big fleets rent space, but cutting checks is another issue, and it takes a day to find a place to stash trucks. Folks have thrown their hands up, especially fleets that don’t have lots of real estate.” Contact Eric Johnson at eric.johnson@spglobal.com .

Logistics Technology News

Parking platform uses business growth to target truckload fleet inefficiency

Use code TPM25GW995 at checkout to save $500 on first year of a Gold subscription and 20% on a TPM26 registration!

Subscribe Now - FT/Anonymous to Gold - Wide Box

SAVE ON A GOLD SUBSCRIPTION AND TPM26

Use code GTW695 at checkout and save $800 on first year of an annual Gold subscription!

Upgrade Subscription - Gold Trials

Become a Gold Subscriber and Save!

Use code TPMGW595 at checkout to save $900 on first year of a Gold subscription and 20% on a TPM26 registration!

Upgrade Subscription - S/SP to Gold - Wide Box

UPGRADE TO GOLD FOR JUST $595

Arm your team with the most trusted information portal for the international container shipping industry.

Group Subscriptions - Wide Box

Get into a group subscription today

Access Journal of Commerce content for 30 days

Free Trial - Wide Box

START A FREE TRIAL TODAY

Use code STS20 at checkout to save 20% on a Silver or Silver Plus annual subscription! 

Subscribe Now - FT/Anonymous to S/SP - Wide Box

SUBSCRIBE AND SAVE

The world of LTL is slow to embrace change. Business anachronisms permeate current supply chain processes. These vestiges of the way things used to work define the LTL freight transportation procurement process of many modern shippers.David Knuth, logistics specialist at IEWC, a global supplier of cable and wire based in Wisconsin, is happy to have modernized the RFP process, automating the entire LTL bidding procedure with Bid$ense, SMC³’s automated truckload and LTL freight transportation sourcing solution. But when prompted, he can still recall what once was.In his previous job, a large part of his duties were consumed by creating an intermodal bid package for carriers. In a spreadsheet, Knuth detailed the company’s volumes lane by lane, taking care to delete any errant keystrokes or misleading data. He would then email out the information to each carrier, taking time to respond to detailed technical questions about the spreadsheet data. Finally, he had to compile all the results, create an algorithm that would compare the carriers on each lane, and award the business.“It was a huge undertaking. It took about four months to do,” Knuth said of the old process. “It was almost a full-time job for that part of the year, every year.”In his new job at IEWC, he sat down with Bid$ense on day one and was amazed at the capabilities. Knuth had never before used a bid tool. SMC³’s latest versions of Bid$ense automate the process even further, taking truckload and LTL RFPs entirely online. The tool draws on RFP best-practices protocols to streamline the bidding communication process, enabling bidding carriers to respond accurately and promptly to shipper requests. The solution also does all the distribution work automatically, electronically submitting shipper bid data to carriers based on their actual service capabilities and performance records. Carriers are alerted with timely prompts for RFP deliverables, so shippers aren’t waiting by the phone for responses.Another benefit of automating the process is the data-cleansing assistance. When Knuth sent spreadsheets to carriers, data errors might cloud the bidding process; he might have to resend data or simply accept a price that did not truly reflect the costs of doing business. Data cleansing is incredibly beneficial, he said.The spreadsheet technique also made bidding analysis an onerous task. Since Bid$ense automates and streamlines the entire RFP process, intensive examination is now simple. SMC³ knows that each bid has more than one best outcome. With uniform responses from each carrier, shippers can quickly rank results and create an unlimited quantity of what-if scenarios to make the optimal procurement decision.Jesse Burnett of Central Garden &amp; Pet experiences many of the same benefits. Founded in 1980, Central Garden &amp; Pet has spent the last three decades growing from a small garden supply company to a provider of a range of products from dog chews and bird seed to soil supplements and natural insecticides. For much of its life, the company shipped these disparate goods via LTL and truckload carriers to retailers throughout the country, relying on each business unit to negotiate directly with their freight transportation providers. This arrangement worked fairly well for a small company, but as Central Garden &amp; Pet expanded, leadership decided to consolidate decision making.Burnett helped centralize the transportation decision making in 2015 with SMC³’s Bid$ense. Before Bid$ense, every business unit operated independently as far as negotiating with carriers.“There were a lot of different things just floating around,” he said. “We didn’t have master agreements in place; no national pricing at all. The pricing from carriers was just all over the place, depending on where you were.”The transformations he saw with Bid$ense were immediate. Burnett has been using the tool about every other year since its implementation at the company. Central Garden and Pet’s $19.6 million 2019 LTL bid saved the company just more than 9 percent when compared to its historical average. For Burnett, though, bid automation extends far beyond savings.“We knew that we weren’t getting the best pricing offer from our carriers just because nothing was centralized,” he continued. “We knew that if we combined everything from all these business units and paired it with one corporate offering, then it would drive some cost benefit with it.”When the company initially decided to centralize bid procurement, executives researched a number of different methodologies and technologies. In the end, though, Burnett found that Bid$ense was both widespread and well known, and that his carrier partners already knew how to use the application. Burnett also highlighted the data-cleansing process as a major benefit, saying the rigorous process ensures that carriers always return the best price.“It definitely has helped drive savings,” he said. “Any time you go out there and you drive that competitiveness with the carriers and they know they’re in a bid environment, it seems to sharpen their pencils.”Transportation procurement is an integral part of the modern supply chain. With Bid$ense, shippers can develop a strategic implementation plan that saves them time and money, but also helps them create strong relationships with their carrier partners. These carriers appreciate the solution’s data-cleansing process; when carriers receive a complete shipment history and future volume forecast, they don’t have to guess on pricing. Carriers that receive more data from shippers get a complete picture of that shipper’s freight, allowing them to accurately plan instead of simply preparing for the worst-case scenario. Clean data presented through an automated system can lead to both bigger shipment savings and a lasting partnership between carrier and customer.Whether customers are looking to streamline over-the-road transportation bidding by automating the RFP process or create an entirely new, centralized sourcing process, Bid$ense has the analytical horsepower to get the job done.SMC³ 2020 Customer Case Study

SMC3rates_shutterstock_5247046.jpg

Shippers save money, time with automated transportation bidding tools

If there’s one immutable truth in the world of logistics, it’s this: LTL is an inherently complex form of transportation. Tariffs, rates, DIM weights, transit times — it’s enough to confuse even seasoned logistics professionals. The solution to this knowledge gap has historically been on-the-job training or university supply chain education, but for a variety of reasons there is now a pressing need for third-party, remote LTL training that prepares logistics workers for transportation success. Global Scope Can Overlook Local Intricacies In the past, professionals looking to move into a supply chain career learned about the basics of supply chain from universities. However, many of these college supply chain programs are now global in scope, focusing on worldwide supply chain management instead of the intricacies of specialized domestic transportation. And even these programs, which used to be widespread, are becoming less common. LTL is not an industry of broad-brush strokes; supply chain professionals really need a pointillistic understanding of the logistics of LTL in order to excel in the industry. Accelerating Need for Dedicated LTL Education This lack of specified training put the onus on employers to prepare new hires with the LTL knowledge needed to do their jobs. Dedicated LTL study is a necessity, not a luxury. At the same time, changes in LTL and the broader supply chain world are accelerating. The reliance on e-commerce has ballooned since the start of the pandemic, and last-mile LTL shipments and related e-commerce strains on the supply chain won’t diminish once social distancing abates. That genie isn’t going back into the bottle. So supply chain employers need logistics workers that are fully versed in all aspects of the industry, ready to solve unique shipping and delivery problems based on their extensive supply chain knowledge But why care about LTL? It’s been reported that some shippers in today’s world are no longer concerned with what mode is used to ship their goods. A Multimodal Approach Ensures On-Time Delivery This mode agnosticism means supply chain stakeholders have to be well versed in all modes of transportation. As unforeseen weather events and other disruptions, such as protests, become more common, savvy logistics employees will need to be armed with familiarity of all modes, not just the most popular, to ensure that freight is delivered on time, without damage, and in the most financially expedient way possible. Offerings like SMC³’s LTL online education courses cover a wide range of topics from LTL basics and operations to more advanced concepts like pricing analytics and transportation law. The company also has plans to continually refresh content, adding new expert presenters and taking the feedback of students to make the courses even better as time goes on. Learn more about&nbsp;<a href="https://logisticstrainingcenter.com/smc3-courses/" rel="noreferrer" class="joc_admin__link">SMC³’s LTL Online Education program</a>&nbsp;and view the 2021 hybrid schedule, featuring live industry experts,&nbsp;<a href="https://www.smc3.com/onlinelearning2021/" rel="noreferrer" class="joc_admin__link">here.</a>

SMC3rates_shutterstock_5247046 (1).jpg

Filling the Supply Chain Education Gap with LTL Education Courses

SAVE ON A GOLD SUBSCRIPTION: Use code TPM25GW995 to save $500 on an annual Gold subscription and 20% on a TPM26 registration!

Subscribe Now - FT/Anonymous to Gold - Offer Box

UPGRADE TO GOLD AND SAVE: Use code GTW695 at checkout and save $800 on first year of a Gold subscription!

Upgrade Subscription

SUBSCRIBE AND SAVE: Use code STSW20 to save 20% on first year of a Silver or Silver Plus annual subscription!


Subscribe Now - FT/Anonymous to S/SP - Offer Box

GET INTO A GROUP SUBSCRIPTION: Arm your team with unlimited Journal of Commerce content

Group Subscriptions - Offer Box

Group Subscriptions

UPGRADE TO GOLD AND SAVE: Use code TPMGW595 at checkout to save $900 on first year of a Gold subscription and 20% on TPM26! 

Upgrade Subscription - S/SP to Gold - Offer Box

START A FREE TRIAL: Access Journal of Commerce content for 30 days

Free Trial - Offer Box

Free Trial

Monthly publication providing an editorial deep dive into global supply chain news

Journal of Commerce Magazine - Rectangle Box

Journal of Commerce Magazine

An in-depth analysis of transport trends in the multipurpose and heavy-lift fleet segment

Breakbulk Report - Rectangle Box

Breakbulk Quarterly

Customers scoring their intermodal partners to identify the best service providers

Intermodal Service Scorecard - Rectangle Box

Intermodal Service Scorecard

A must-attend conference for shippers & logistics providers moving goods inland

Inland Conference - Rectangle Box

Attend Inland25

A premium access index of savings using domestic intermodal vs. OTR 

ISI Report - Rectangle Box

Intermodal Savings Index

An extensive dashboard of charts organized by trade lane, mode, and topic

Gateway - Rectangle Box

Gateway

A premium access outlook critical to shippers and transportation providers

QI Report - Rectangle Box

Quarterly Intelligence

The latest port news from the Journal of Commerce spans the globe from North Carolina and Florida to Shanghai and Singapore. Port news includes port automation, terminal construction projects, the future of decarbonization and net-zero shipping, dredging, port hinterland connectivity, labor, disruption, port congestion and cargo flow.

Drayage

Breakbulk ports

North American ports

Marine terminals

Longshore labor

Stay informed on port news worldwide with Journal of Commerce. From decarbonization to labor updates, get insights on global developments.

Port News | Journal of Commerce

The Journal of Commerce is the industry’s source for maritime news and analysis about ocean container shipping, logistics, supply chains, global shipping ports, shipping technology solutions and end-to-end connectivity. Coverage tracks the movement of containerized cargo — from origin to destination — handled by marine terminals in the US and abroad, depots, container ports, container lines, drayage, consignees and shippers, forwarders, non-vessel operating common carriers (NVOs) and off-dock warehousing providers, as well as pricing, capacity, volume and reliability on the trans-Pacific, Asia–Europe, North America–Caribbean, Central and South American and intra-Asia trades.

Discover comprehensive trucking news and trends with Journal of Commerce - from trucking LTL to regulation and trucking supply and demand.

Breakbulk News shipping | Journal of Commerce

Breakbulk News

Container shipping news and analysis of ocean container shipping, logistics, supply chains, technology and end-to-end connectivity.

Container Shipping News | Journal of Commerce

News and analysis of ocean containerized cargo movement, logistics, supply chains, technology, and end-to-end connectivity. Maritime news and analysis of containerized ocean cargo movement, breakbulk and roll-on and roll-off shipping from origin to destination.

Latest News

More News & Analysis

Hub Group boosts reefer intermodal business with Marten acquisition

Flagging European industry clouds Rotterdam’s rising container volume

FedEx Freight delays enforcement of LTL re-classification