<div class="phx-topic abstract-wrapper">The Alameda Corridor Transportation Authority (ACTA) said it expects the Southern California intermo</div>

The Alameda Corridor Transportation Authority (ACTA) said it expects the Southern California intermo

<div>The Alameda Corridor Transportation Authority (ACTA) said it expects the Southern California intermodal train artery to be completely grade-separated by spring.The $107 million Pacific Coast Highway Grade Separation Project, a half-mile bridge in Wilmington, Calif., is slated to be finished in March or April 2004. It is the last remaining grade crossing on the 20-mile Alameda Corridor.Open since April 2002, the Alameda Corridor provides a four-lane, high-speed freight-rail expressway between the ports of Long Beach and Los Angeles, and transcontinental rail yards near downtown L.A.</div>...

The Alameda Corridor Transportation Authority (ACTA) said it expects the Southern California intermodal train artery to be completely grade-separated by spring. The $107 million Pacific Coast Highway Grade Separation Project, a half-mile bridge in Wilmington, Calif., is slated to be finished in March or April 2004. It is the last remaining grade crossing on the 20-mile Alameda Corridor. Open since April 2002, the Alameda Corridor provides a four-lane, high-speed freight-rail expressway between the ports of Long Beach and Los Angeles, and transcontinental rail yards near downtown L.A.

Transport, Trade and Regulation News

Alameda Corridor finishing last grade separation

<div class="phx-topic abstract-wrapper">Larger components are pushing handling boundaries with an increasing number of locations too small to accommodate growing cargo sizes.</div>

Larger components are pushing handling boundaries with an increasing number of locations too small to accommodate growing cargo sizes.

Feature image

<div class="phx-topic">The increasing size and complexity of project cargoes is demanding increasingly sophisticated engineering solutions and pushing the boundaries of transport capabilities, project cargo experts say.Speaking to the Journal of Commerce, Hagen Hennig, technical director at dteq Transport Engineering Solutions, described project cargo as “getting more engineering-heavy.” Where dteq only needed two engineers to support the group at start up, the company now counts 50-plus engineers. “That’s a good indication of how the cargo and the project requirements have evolved,” Hennig said. He also noted the impact of that growth on multipurpose vessel capabilities. ”Vessels need to be stronger to accommodate these larger cargoes, which can be seen in the increase in crane capacities and the growing fleet of deck carriers,” Hennig said.Cosmatos Group last year moved the largest cargo it had moved in its 53-year history, handling a 690-ton, nine-meter-high component. Elisabeth Cosmatos, CEO of Cosmatos Group and president of The Heavy Lift Group (THLG), described the move as a “milestone,” but also a challenge. There is also a growing emphasis on technical know-how, with Hennig noting the transport engineering mindset in clients is increasing. ”It is not only about having the best product, it is also about being able to transport that product safely and cost efficiently to its destination,” he said.Hennig stressed the role of engineering in expanding possibilities. ”With engineering you can always push boundaries further,” he said, giving the example of regular transportation of 1000-plus ton nacelles for the wind energy market that were unimaginable previously. <h3>Infrastructure limitations pose challenges</h3>Still, both Hennig and colleague Boris Dykiert, commercial director with dteq Transport Engineering Solutions, acknowledged inherent limitations. ”It’s important to consider the existing infrastructure and environment too,” Dykiert said. “For example, it is already very difficult to get out of some ports in Europe to (the) site with the latest generation of wind blades due to tight turns.” Hennig added that there is a limit to maximum size depending on available infrastructure.“If the project is next to the port and that port is deep with good moorings, that helps,” he said. “But the last mile needs to be there, too. That will determine the maximum cargo envelope.”Speaking on a panel at Breakbulk Europe in mid-May, Richard Kaladji, head of the project logistics department at Air Liquide, affirmed the trend of increasing cargo sizes and underlined the heightened risks involved. ”Today, the challenge is greater as you cannot mess up,” he said. “You have to validate the solution many times as the stakes are higher with larger cargoes.”Contact Carly Fields <a href="mailto:carly.fields@spglobal.com">at carly.fields@spglobal.com</a>.</div>

The increasing size and complexity of project cargoes is demanding increasingly sophisticated engineering solutions and pushing the boundaries of transport capabilities, project cargo experts say. Speaking to the Journal of Commerce, Hagen Hennig, technical director at dteq Transport Engineering Solutions, described project cargo as “getting more engineering-heavy.” Where dteq only needed two engineers to support the group at start up, the company now counts 50-plus engineers. “That’s a good indication of how the cargo and the project requirements have evolved,” Hennig said. He also noted the impact of that growth on multipurpose vessel capabilities. ”Vessels need to be stronger to accommodate these larger cargoes, which can be seen in the increase in crane capacities and the growing fleet of deck carriers,” Hennig said. Cosmatos Group last year moved the largest cargo it had moved in its 53-year history, handling a 690-ton, nine-meter-high component. Elisabeth Cosmatos, CEO of Cosmatos Group and president of The Heavy Lift Group (THLG), described the move as a “milestone,” but also a challenge. There is also a growing emphasis on technical know-how, with Hennig noting the transport engineering mindset in clients is increasing. ”It is not only about having the best product, it is also about being able to transport that product safely and cost efficiently to its destination,” he said. Hennig stressed the role of engineering in expanding possibilities. ”With engineering you can always push boundaries further,” he said, giving the example of regular transportation of 1000-plus ton nacelles for the wind energy market that were unimaginable previously. Infrastructure limitations pose challenges Still, both Hennig and colleague Boris Dykiert, commercial director with dteq Transport Engineering Solutions, acknowledged inherent limitations. ”It’s important to consider the existing infrastructure and environment too,” Dykiert said. “For example, it is already very difficult to get out of some ports in Europe to (the) site with the latest generation of wind blades due to tight turns.” Hennig added that there is a limit to maximum size depending on available infrastructure. “If the project is next to the port and that port is deep with good moorings, that helps,” he said. “But the last mile needs to be there, too. That will determine the maximum cargo envelope.” Speaking on a panel at Breakbulk Europe in mid-May, Richard Kaladji, head of the project logistics department at Air Liquide, affirmed the trend of increasing cargo sizes and underlined the heightened risks involved. ”Today, the challenge is greater as you cannot mess up,” he said. “You have to validate the solution many times as the stakes are higher with larger cargoes.” Contact Carly Fields at carly.fields@spglobal.com .

Energy projects

Project cargo

Breakbulk News

Growing project cargo scale testing transport limitations, but driving innovation

<div class="phx-topic abstract-wrapper">The carrier continues to ramp up its non-ocean businesses that were acquired from Performance Team with the lease of a new warehouse located about 10 miles from the Port of Philadelphia.</div>

The carrier continues to ramp up its non-ocean businesses that were acquired from Performance Team with the lease of a new warehouse located about 10 miles from the Port of Philadelphia.

<div class="phx-topic">Maersk has added to its North American portfolio with the lease of one of the largest warehouses in southern New Jersey. The move comes as Maersk flagged better growth in its warehousing and related businesses during its most recent earnings release. Maersk confirmed media reports that it leased the 1.2-million-square-foot Box Park Logistics Center, located about 10 miles from the Port of Philadelphia and roughly 80 miles from the Port of New York and New Jersey. The facility, built in 2023, has 215 dock doors and can be expanded by another 300,000 square feet. The region where the warehouse is located has seen new construction plummet amid increasing industrial property vacancies in the Northeast US. Commercial realtor CBRE said in May that new warehouse construction in the south New Jersey-Philadelphia metro region totaled 11.6 million square feet in the first quarter of 2025, down 25.3% from the fourth quarter of 2024. Vacancy rates for Northeast warehouses reached 7.6% in the first quarter, compared to around 3% in 2022, marking 12 quarters of increasing vacancy rates. Maersk said in its first-quarter earnings release that it expects vacancy rates to remain close to the long-term 7% average as new construction better matches demand. Maersk’s fulfillment business, comprised mostly of the <a href="https://www.joc.com/article/maersk-acquisition-deepens-north-american-warehouse-reach-5213428">former Performance Team business</a>, saw first-quarter revenue fall 7% to $1.32 billion as it reorganized its last-mile and middle-mile business in North America. However, Maersk Chief Executive Vincent Clerc said the company’s warehousing and e-commerce fulfillment “increased in volumes with growth in new customers.” Maersk’s contract logistics business was also more profitable in the 2025 first quarter, with operating profit margin reaching 4.1% from 1.5% a year earlier. Clerc said warehousing and e-commerce fulfillment helped drive the better results. Contact Michael Angell at <a href="mailto:michael.angell@spglobal.com">michael.angell@spglobal.com</a>. </div>

Maersk has added to its North American portfolio with the lease of one of the largest warehouses in southern New Jersey. The move comes as Maersk flagged better growth in its warehousing and related businesses during its most recent earnings release. Maersk confirmed media reports that it leased the 1.2-million-square-foot Box Park Logistics Center, located about 10 miles from the Port of Philadelphia and roughly 80 miles from the Port of New York and New Jersey. The facility, built in 2023, has 215 dock doors and can be expanded by another 300,000 square feet. The region where the warehouse is located has seen new construction plummet amid increasing industrial property vacancies in the Northeast US. Commercial realtor CBRE said in May that new warehouse construction in the south New Jersey-Philadelphia metro region totaled 11.6 million square feet in the first quarter of 2025, down 25.3% from the fourth quarter of 2024. Vacancy rates for Northeast warehouses reached 7.6% in the first quarter, compared to around 3% in 2022, marking 12 quarters of increasing vacancy rates. Maersk said in its first-quarter earnings release that it expects vacancy rates to remain close to the long-term 7% average as new construction better matches demand. Maersk’s fulfillment business, comprised mostly of the former Performance Team business , saw first-quarter revenue fall 7% to $1.32 billion as it reorganized its last-mile and middle-mile business in North America. However, Maersk Chief Executive Vincent Clerc said the company’s warehousing and e-commerce fulfillment “increased in volumes with growth in new customers.” Maersk’s contract logistics business was also more profitable in the 2025 first quarter, with operating profit margin reaching 4.1% from 1.5% a year earlier. Clerc said warehousing and e-commerce fulfillment helped drive the better results. Contact Michael Angell at michael.angell@spglobal.com .

Maritime

Container Shipping News

Port News

Port infrastructure

Container lines

Maersk’s contract logistics business adds New Jersey warehouse

<div class="phx-topic abstract-wrapper">Adding to recent capacity cutbacks, the carrier has redeployed vessels serving its premier Himalaya Express service between India, Europe and the Mediterranean onto Asian trades.</div>

Adding to recent capacity cutbacks, the carrier has redeployed vessels serving its premier Himalaya Express service between India, Europe and the Mediterranean onto Asian trades.

<div class="phx-topic">More signs are emerging of mainline operators with larger Indian market share strategically adjusting their networks amid a rush of cargo bookings out of China that is already testing supply chains at many Asian hub ports. Adding to recent capacity cutbacks on the India-US East Coast trade, Mediterranean Shipping Co. has redeployed vessels serving its premier Himalaya Express (HEX) service between India, Europe and the Mediterranean onto Asian trades, updated schedule data obtained by the Journal of Commerce shows. Out of five upcoming HEX sailings already declared for berthing at India’s Nhava Sheva Port through early July, four vessels have their origin load ports in China, reflecting large-scale cargo relay plans. For example, the MSC Sindy, due to dock at Nhava Sheva on June 5, has made calls to Shanghai, Ningbo and Singapore in what is evidently an ad-hoc rotation. “We are now seeing a lot of impromptu changes for MSC services out of India, with vessels swapped out and port calls rejigged,” a Mumbai-based freight forwarder who did not want to be identified told the Journal of Commerce. “The Asia surge seems to be driving that capacity shakeup.” Sources also noted that the Geneva-based liner is considering adding Vizhinjam Port in southern India to the HEX rotation, likely for the interim to support resurgent transshipment volumes, beginning with the MSC Nairobi X due to arrive in Nhava Sheva on June 9. With multiple changes in the cards, the service will now cover Nhava Sheva, Mundra, Vizhinjam, Sines, Valencia, Gioia Tauro, Genoa, Barcelona and Malaga, the sources said. The weekly HEX has long used a fleet of large-size vessels — averaging 15,000 TEUs in capacity — with a strong schedule reliability track record. MSC recently reset the HEX berthing window in Nhava Sheva by shifting calls from the DP World terminal to PSA International’s facility for greater operational flexibility. Additionally, MSC’s IPAK service (India-Europe) has no sailing in the current week, port berthing data indicates. Sliding vessel schedules extend to other Indian networks. A South India/North Europe/Mediterranean/Oceania loop run jointly by MSC and CMA CGM, branded as the Australia Express and NEWMO, respectively, has voided direct calls to Ennore Port (Chennai) in late May, tightening capacity out of the region that has fewer long-haul network options. “Space issues have started for bookings to Europe and we expect westbound rates to move up,” a Chennai-based forwarder said. MSC and CMA CGM have already rolled $800 per container into West India-Europe spot pricing from this week, sources said. Contact Bency Mathew at <a href="mailto:bencyvmathew@gmail.com">bencyvmathew@gmail.com</a>.</div>

More signs are emerging of mainline operators with larger Indian market share strategically adjusting their networks amid a rush of cargo bookings out of China that is already testing supply chains at many Asian hub ports. Adding to recent capacity cutbacks on the India-US East Coast trade, Mediterranean Shipping Co. has redeployed vessels serving its premier Himalaya Express (HEX) service between India, Europe and the Mediterranean onto Asian trades, updated schedule data obtained by the Journal of Commerce shows. Out of five upcoming HEX sailings already declared for berthing at India’s Nhava Sheva Port through early July, four vessels have their origin load ports in China, reflecting large-scale cargo relay plans. For example, the MSC Sindy, due to dock at Nhava Sheva on June 5, has made calls to Shanghai, Ningbo and Singapore in what is evidently an ad-hoc rotation. “We are now seeing a lot of impromptu changes for MSC services out of India, with vessels swapped out and port calls rejigged,” a Mumbai-based freight forwarder who did not want to be identified told the Journal of Commerce. “The Asia surge seems to be driving that capacity shakeup.” Sources also noted that the Geneva-based liner is considering adding Vizhinjam Port in southern India to the HEX rotation, likely for the interim to support resurgent transshipment volumes, beginning with the MSC Nairobi X due to arrive in Nhava Sheva on June 9. With multiple changes in the cards, the service will now cover Nhava Sheva, Mundra, Vizhinjam, Sines, Valencia, Gioia Tauro, Genoa, Barcelona and Malaga, the sources said. The weekly HEX has long used a fleet of large-size vessels — averaging 15,000 TEUs in capacity — with a strong schedule reliability track record. MSC recently reset the HEX berthing window in Nhava Sheva by shifting calls from the DP World terminal to PSA International’s facility for greater operational flexibility. Additionally, MSC’s IPAK service (India-Europe) has no sailing in the current week, port berthing data indicates. Sliding vessel schedules extend to other Indian networks. A South India/North Europe/Mediterranean/Oceania loop run jointly by MSC and CMA CGM, branded as the Australia Express and NEWMO, respectively, has voided direct calls to Ennore Port (Chennai) in late May, tightening capacity out of the region that has fewer long-haul network options. “Space issues have started for bookings to Europe and we expect westbound rates to move up,” a Chennai-based forwarder said. MSC and CMA CGM have already rolled $800 per container into West India-Europe spot pricing from this week, sources said. Contact Bency Mathew at bencyvmathew@gmail.com .

Asia-Europe

MSC juggles India-Europe network rotations amid Asia cargo rush

<div class="phx-topic abstract-wrapper">Carriers are looking to ride the higher rates as long as they can before the fresh vessel capacity that is making its way to the trans-Pacific begins to dull the momentum.</div>

Carriers are looking to ride the higher rates as long as they can before the fresh vessel capacity that is making its way to the trans-Pacific begins to dull the momentum.

<div class="phx-topic">Trans-Pacific spot rates are rising at a faster clip than the pandemic-linked boom in the spring of 2021 amid a spike in imports from Asia driven by the temporary pause in tariff hikes put in place by the Trump administration. An ocean carrier executive said liners are being “very aggressive on spot rates” to capitalize on the cargo surge, with so-called general rate increases (GRIs) implemented on June 1 and two other price hikes planned for mid-June and July 1. A half-dozen forwarders told the Journal of Commerce that spot rates this week are in the low $6,000s per FEU to the US West Coast and low $7,000s to the East Coast. Rate indexes, which take a week or two to capture the full rate gains, still showed a big jump this week. Platts, a sister company of the Journal of Commerce within S&amp;P Global, listed the spot rate from Asia to the West Coast as of Monday at $5,600 per FEU, up 33% from just last week. The East Coast rate was $6,500 per FEU, up 25%. Platts data shows the West Coast spot rate has rocketed 173% higher since mid-April, with the East Coast rate doubling over that time. By comparison, as US imports from Asia began to climb in May 2021 following the COVID-related slump, spot rates to the US rose about 20% from mid-April. <div class="wrapper-narrow"><dynamic-object type="jocchartid" resource-id="e8c13a3e-9f5a-412f-8741-adbf5e1a7779"></dynamic-object></div>Carriers are looking to ride the higher rates as long as they can before the fresh vessel capacity that is making its way to the trans-Pacific in the form of extra-loaders and new services begins to dull the momentum. “It seems like the next [rate] increase or two will be the last ones,” said Jason Cook, CEO of Ardent Global Logistics. “I’m getting the impression that this capacity is already finding its way into the trade.” The new capacity is especially significant on the trade lanes from Asia to the West Coast. Carriers in June have increased capacity by 12.8% and plan another 16.5% hike in July, Alan Murphy, CEO of Sea-Intelligence Maritime Analysis, said in his Sunday Spotlight newsletter. “In total, this is an injection of 397,000 TEUs of capacity in June/July compared to the situation just three weeks ago,” Murphy said. <h3>Import surge coming to Southern California </h3>The surge in imports from Asia is tied to the Trump administration’s time-limited pause in higher tariffs. The pauses are expiring over the next two months — one on July 9 on imports from most nations except for China, and another in mid-August on the huge <a href="https://www.joc.com/article/federal-court-ruling-blocking-tariffs-resets-shipping-outlook-6013402">145% tariff on imports from China that has been reduced to 30%</a>. The White House says it is busy negotiating new trade deals in the meantime. As those deadlines approach, the import spike is manifesting itself in the Los Angeles-Long Beach port complex, which handles about 50% of US imports from Asia. According to data from both ports, the Southern California complex is projecting a huge volume of imports over the next few weeks. Los Angeles, which this week will handle about 92,000 TEUs of laden imports, is forecasting more than 103,000 TEUs next week and 112,000 TEUs in the week of June 15. Long Beach, which will handle about 75,000 import TEUs next week, is projecting imports of more than 90,000 TEUs per week during the last three weeks of June. “Clearly shippers are trying to catch up on lost time out of China,” one forwarder said. Bookings out of Southeast Asia are quite strong, while bookings from China, which spiked after the May 12 “pause” announcement, are now “slightly weaker, but nothing that will throw the trade off,” said James Caradonna, executive vice president of the forwarder Spedag America. <h3>Short, but intense, peak season expected </h3>Based on the significant level of frontloading that has already taken place from Southeast Asia and China, forwarders say this year’s peak shipping season will start earlier and be noticeably shorter than typical peak seasons, which run from August through October. “The peak season has already started,” said Christian Sur, executive vice president of ocean freight contract logistics at the forwarder Unique Logistics International. “The peak of the peak will be in the second half of June.” For that reason, carriers are attempting to maintain cargo flow and bookings from their core customers so that when imports fall off, liners will maintain what business is left for the remainder of the year, the carrier executive said. Carriers right now are slow-walking peak season surcharges (PSSs), which are applied to cargo owners’ service contracts and forwarders’ named-account (NAC) rates, even while they announce additional spot rate increases, the executive said. “The lines are very cautious about PSSs...,” the source said. Contact Bill Mongelluzzo at <a href="mailto:bill.mongelluzzo@spglobal.com">bill.mongelluzzo@spglobal.com</a>. Contact Laura Robb at <a href="mailto:laura.robb@spglobal.com">laura.robb@spglobal.com</a>. </div>

Trans-Pacific spot rates are rising at a faster clip than the pandemic-linked boom in the spring of 2021 amid a spike in imports from Asia driven by the temporary pause in tariff hikes put in place by the Trump administration. An ocean carrier executive said liners are being “very aggressive on spot rates” to capitalize on the cargo surge, with so-called general rate increases (GRIs) implemented on June 1 and two other price hikes planned for mid-June and July 1. A half-dozen forwarders told the Journal of Commerce that spot rates this week are in the low $6,000s per FEU to the US West Coast and low $7,000s to the East Coast. Rate indexes, which take a week or two to capture the full rate gains, still showed a big jump this week. Platts, a sister company of the Journal of Commerce within S&P Global, listed the spot rate from Asia to the West Coast as of Monday at $5,600 per FEU, up 33% from just last week. The East Coast rate was $6,500 per FEU, up 25%. Platts data shows the West Coast spot rate has rocketed 173% higher since mid-April, with the East Coast rate doubling over that time. By comparison, as US imports from Asia began to climb in May 2021 following the COVID-related slump, spot rates to the US rose about 20% from mid-April. Carriers are looking to ride the higher rates as long as they can before the fresh vessel capacity that is making its way to the trans-Pacific in the form of extra-loaders and new services begins to dull the momentum. “It seems like the next [rate] increase or two will be the last ones,” said Jason Cook, CEO of Ardent Global Logistics. “I’m getting the impression that this capacity is already finding its way into the trade.” The new capacity is especially significant on the trade lanes from Asia to the West Coast. Carriers in June have increased capacity by 12.8% and plan another 16.5% hike in July, Alan Murphy, CEO of Sea-Intelligence Maritime Analysis, said in his Sunday Spotlight newsletter. “In total, this is an injection of 397,000 TEUs of capacity in June/July compared to the situation just three weeks ago,” Murphy said. Import surge coming to Southern California The surge in imports from Asia is tied to the Trump administration’s time-limited pause in higher tariffs. The pauses are expiring over the next two months — one on July 9 on imports from most nations except for China, and another in mid-August on the huge 145% tariff on imports from China that has been reduced to 30% . The White House says it is busy negotiating new trade deals in the meantime. As those deadlines approach, the import spike is manifesting itself in the Los Angeles-Long Beach port complex, which handles about 50% of US imports from Asia. According to data from both ports, the Southern California complex is projecting a huge volume of imports over the next few weeks. Los Angeles, which this week will handle about 92,000 TEUs of laden imports, is forecasting more than 103,000 TEUs next week and 112,000 TEUs in the week of June 15. Long Beach, which will handle about 75,000 import TEUs next week, is projecting imports of more than 90,000 TEUs per week during the last three weeks of June. “Clearly shippers are trying to catch up on lost time out of China,” one forwarder said. Bookings out of Southeast Asia are quite strong, while bookings from China, which spiked after the May 12 “pause” announcement, are now “slightly weaker, but nothing that will throw the trade off,” said James Caradonna, executive vice president of the forwarder Spedag America. Short, but intense, peak season expected Based on the significant level of frontloading that has already taken place from Southeast Asia and China, forwarders say this year’s peak shipping season will start earlier and be noticeably shorter than typical peak seasons, which run from August through October. “The peak season has already started,” said Christian Sur, executive vice president of ocean freight contract logistics at the forwarder Unique Logistics International. “The peak of the peak will be in the second half of June.” For that reason, carriers are attempting to maintain cargo flow and bookings from their core customers so that when imports fall off, liners will maintain what business is left for the remainder of the year, the carrier executive said. Carriers right now are slow-walking peak season surcharges (PSSs), which are applied to cargo owners’ service contracts and forwarders’ named-account (NAC) rates, even while they announce additional spot rate increases, the executive said. “The lines are very cautious about PSSs...,” the source said. Contact Bill Mongelluzzo at bill.mongelluzzo@spglobal.com . Contact Laura Robb at laura.robb@spglobal.com .

Forwarding

Trans-Pacific

Pause in tariff hikes drives big gains in trans-Pacific spot rates

<div class="phx-topic abstract-wrapper">Hauling containers between Mexico and the US comes with additional regulations and potential disruptions that could make the 95% on-time performance promise more challenging for Hunt’s new cross-border service.</div>

Hauling containers between Mexico and the US comes with additional regulations and potential disruptions that could make the 95% on-time performance promise more challenging for Hunt’s new cross-border service.

<div class="phx-topic">J.B. Hunt wants to do what few have pulled off in long-haul intermodal: achieve 95% on-time performance. That is incredibly difficult for any 2,000-mile haul, but even more so on cross-border freight in Mexico, where the journey for J.B. Hunt requires two railroads, a manual customs clearance process, and a single-track bridge that routinely clogs one of North America’s busiest trade corridors. It’s a daunting task facing the intermodal giant as it handles the first <a href="https://www.joc.com/article/jb-hunt-launching-quantum-de-mexico-for-time-sensitive-cross-border-freight-6014579">Quantum de México</a> containers in the coming months. J.B. Hunt will team up with BNSF Railway and Grupo México Transportes (GMXT), the majority owner of Mexican railroad Ferromex. <div class="wrapper-narrow float-right-element"><img src="/images/phoenix/6017110_0.1.jpg"></img></div>The <a href="https://www.joc.com/article/j-b-hunt-bnsf-launch-new-intermodal-service-to-grab-time-sensitive-freight-5215574">Quantum product</a> was introduced in 2023 as a US domestic service by Hunt and BNSF, promising tight delivery windows. According to J.B. Hunt, the service has consistently met or exceeded its on-time targets, although the company declined to provide performance data. The value proposition behind Quantum is simple: promise reliability and on-time performance to shippers using a mode that has struggled with both. Intermodal rail can be fast and dependable, but every few years, service degrades significantly for a multitude of reasons. “Most customers have appointment windows, so once we understand their expectations, we design transit and pickup schedules all the way back to the initial tender,” Spencer Frazier, executive vice president of sales for J.B. Hunt, told the Journal of Commerce. “For Quantum de México, it’s how our customers define 95% on time, not Ferromex, BNSF or us.” The formula can work in the US, where BNSF and J.B. Hunt are closely aligned and can fall back on J.B. Hunt’s 19,000-truck fleet to make up for rail hiccups. Cross-border service, though, is a different beast. Nevertheless, the market potential in Mexico is significant. In 2024, Mexico’s trade surplus with the US for automotive goods hit a record $137.8 billion, a 6% increase from the previous year, according to the US Department of Commerce. Total US imports from Mexico reached $505.9 billion, up 6.4% year over year. With nearshoring trends gaining momentum, Hunt’s competitors are investing aggressively. Last October, Hub Group formed a <a href="https://www.joc.com/article/hub-group-boosts-cross-border-business-in-jv-with-mexican-dray-carrier-5745355">joint venture with Easo</a>, a leading intermodal operator in Mexico. Schneider National has expanded its relationship with Canadian Pacific Kansas City (CPKC), offering service from <a href="https://www.joc.com/article/cpkc-csx-to-launch-joint-mexico-southeast-us-service-dec-1-5790107">Mexico to the US Southeast</a>, and boasts the only single-rail service between Mexico and Chicago. <h3>Getting out of Mexico </h3>One of the most immediate hurdles for Quantum de México is the customs clearance process. Before a container can even be loaded, physical paperwork must be presented and stamped at the terminal. Outside of Monterrey, customs offices are open only during weekday business hours and a few hours on Saturdays. That leaves a narrow daily window to get freight cleared and loaded. “We’re not running Quantum de Mexico service at wacky hours when there’s no customs office open,” Luis Hernández, GMXT’s vice president of intermodal, told the Journal of Commerce. “We’re working within the existing process to clear cargo during office hours and move it accordingly.” But miss that limited processing window and achieving the service guarantee becomes difficult. If there is a problem while the train is in transit, a new set of issues arises. In the US, BNSF can unload the container and place it onto J.B. Hunt’s extensive truck fleet. In Mexico, however, J.B. Hunt does not own trucks or employ company drivers. It must rely on third-party trucking companies. Jon Gabriel, BNSF’s group vice president for consumer products, said contingency plans are ready if a disruption occurs between Monterrey and the border. “It includes lift capability at Eagle Pass [Texas] itself,” he said. “We can drop a container there and use the J.B. Hunt truck fleet to recover if something happens en route. We have many of the same levers and processes in place as we do in US.” <h3>Crossing into the US </h3>Having a backup plan in Eagle Pass is important because the US-Mexico border comes with its own set of complications. Crossing the old, single-track bridge between Piedras Negras, Mexico, and Eagle Pass requires three separate crews: a Mexican crew to bring the train to the border, a second to take it across the bridge, and a third US crew to haul it north. “Trains come to a complete stop so the hand-off crew can disembark and walk back to their side of the border,” Union Pacific wrote in a recent <a href="https://www.up.com/aboutup/community/inside_track/safer-border-operations-it-250523.htm">online post</a>. The process can take up to 40 minutes and increases the risk of cargo theft and congestion trickling down to other trains. CPKC and Schneider <a href="https://www.joc.com/article/cpkcs-bridge-expansion-boosts-us-mexico-capacity-reliability-5908449">bypass these delays entirely</a> with the bridge in Laredo that opened a second span last December. UP last month <a href="https://www.up.com/aboutup/community/inside_track/safer-border-operations-it-250523.htm">completed a pilot program</a> in which Mexican crews were allowed to bring trains directly into its Eagle Pass terminal, reducing its exposure to theft, border delays and crew changes easily taking a half hour. BNSF hasn’t tested such options with customs agencies on both sides of the border, but says the single-track bridge isn’t limiting operations. “Physical bridge capacity is not a constraint,” BNSF’s Gabriel said. “The train from Monterrey to [Fort Worth] is consistently beating its schedule. The route will not limit our ability to meet the service commitments to our customers.” Contact Ari Ashe at <a href="mailto:ari.ashe@spglobal.com">ari.ashe@spglobal.com</a>. </div>

J.B. Hunt wants to do what few have pulled off in long-haul intermodal: achieve 95% on-time performance. That is incredibly difficult for any 2,000-mile haul, but even more so on cross-border freight in Mexico, where the journey for J.B. Hunt requires two railroads, a manual customs clearance process, and a single-track bridge that routinely clogs one of North America’s busiest trade corridors. It’s a daunting task facing the intermodal giant as it handles the first Quantum de México containers in the coming months. J.B. Hunt will team up with BNSF Railway and Grupo México Transportes (GMXT), the majority owner of Mexican railroad Ferromex. The Quantum product was introduced in 2023 as a US domestic service by Hunt and BNSF, promising tight delivery windows. According to J.B. Hunt, the service has consistently met or exceeded its on-time targets, although the company declined to provide performance data. The value proposition behind Quantum is simple: promise reliability and on-time performance to shippers using a mode that has struggled with both. Intermodal rail can be fast and dependable, but every few years, service degrades significantly for a multitude of reasons. “Most customers have appointment windows, so once we understand their expectations, we design transit and pickup schedules all the way back to the initial tender,” Spencer Frazier, executive vice president of sales for J.B. Hunt, told the Journal of Commerce. “For Quantum de México, it’s how our customers define 95% on time, not Ferromex, BNSF or us.” The formula can work in the US, where BNSF and J.B. Hunt are closely aligned and can fall back on J.B. Hunt’s 19,000-truck fleet to make up for rail hiccups. Cross-border service, though, is a different beast. Nevertheless, the market potential in Mexico is significant. In 2024, Mexico’s trade surplus with the US for automotive goods hit a record $137.8 billion, a 6% increase from the previous year, according to the US Department of Commerce. Total US imports from Mexico reached $505.9 billion, up 6.4% year over year. With nearshoring trends gaining momentum, Hunt’s competitors are investing aggressively. Last October, Hub Group formed a joint venture with Easo , a leading intermodal operator in Mexico. Schneider National has expanded its relationship with Canadian Pacific Kansas City (CPKC), offering service from Mexico to the US Southeast , and boasts the only single-rail service between Mexico and Chicago. Getting out of Mexico One of the most immediate hurdles for Quantum de México is the customs clearance process. Before a container can even be loaded, physical paperwork must be presented and stamped at the terminal. Outside of Monterrey, customs offices are open only during weekday business hours and a few hours on Saturdays. That leaves a narrow daily window to get freight cleared and loaded. “We’re not running Quantum de Mexico service at wacky hours when there’s no customs office open,” Luis Hernández, GMXT’s vice president of intermodal, told the Journal of Commerce. “We’re working within the existing process to clear cargo during office hours and move it accordingly.” But miss that limited processing window and achieving the service guarantee becomes difficult. If there is a problem while the train is in transit, a new set of issues arises. In the US, BNSF can unload the container and place it onto J.B. Hunt’s extensive truck fleet. In Mexico, however, J.B. Hunt does not own trucks or employ company drivers. It must rely on third-party trucking companies. Jon Gabriel, BNSF’s group vice president for consumer products, said contingency plans are ready if a disruption occurs between Monterrey and the border. “It includes lift capability at Eagle Pass [Texas] itself,” he said. “We can drop a container there and use the J.B. Hunt truck fleet to recover if something happens en route. We have many of the same levers and processes in place as we do in US.” Crossing into the US Having a backup plan in Eagle Pass is important because the US-Mexico border comes with its own set of complications. Crossing the old, single-track bridge between Piedras Negras, Mexico, and Eagle Pass requires three separate crews: a Mexican crew to bring the train to the border, a second to take it across the bridge, and a third US crew to haul it north. “Trains come to a complete stop so the hand-off crew can disembark and walk back to their side of the border,” Union Pacific wrote in a recent online post . The process can take up to 40 minutes and increases the risk of cargo theft and congestion trickling down to other trains. CPKC and Schneider bypass these delays entirely with the bridge in Laredo that opened a second span last December. UP last month completed a pilot program in which Mexican crews were allowed to bring trains directly into its Eagle Pass terminal, reducing its exposure to theft, border delays and crew changes easily taking a half hour. BNSF hasn’t tested such options with customs agencies on both sides of the border, but says the single-track bridge isn’t limiting operations. “Physical bridge capacity is not a constraint,” BNSF’s Gabriel said. “The train from Monterrey to [Fort Worth] is consistently beating its schedule. The route will not limit our ability to meet the service commitments to our customers.” Contact Ari Ashe at ari.ashe@spglobal.com .

Trucking News

Rail News

North-American rail

Intermodal providers

Surface

Mexico presents obstacles to meeting J.B. Hunt’s ‘Quantum’ guarantee

Use code GTW695 at checkout and save $800 on first year of an annual Gold subscription!

Upgrade Subscription - Gold Trials

Become a Gold Subscriber and Save!

Use code GUW795 at checkout and save $700 on first year of a Gold subscription!

Upgrade Subscription - Wide Box

UPGRADE TODAY AND SAVE

Arm your team with the most trusted information portal for the international container shipping industry.

Group Subscriptions - Wide Box

Get into a group subscription today

Access Journal of Commerce content for 30 days

Free Trial - Wide Box

START A FREE TRIAL TODAY

Use code STSW20 at checkout to save 20% on the first year of any annual subscription! 

Subscribe Now - Free Trials - Wide Box

SUBSCRIBE AND SAVE

Choose a subscription plan that works best for you!

Subscribe Now - Anonymous - Wide Box

SUBSCRIBE TODAY

The world of LTL is slow to embrace change. Business anachronisms permeate current supply chain processes. These vestiges of the way things used to work define the LTL freight transportation procurement process of many modern shippers.David Knuth, logistics specialist at IEWC, a global supplier of cable and wire based in Wisconsin, is happy to have modernized the RFP process, automating the entire LTL bidding procedure with Bid$ense, SMC³’s automated truckload and LTL freight transportation sourcing solution. But when prompted, he can still recall what once was.In his previous job, a large part of his duties were consumed by creating an intermodal bid package for carriers. In a spreadsheet, Knuth detailed the company’s volumes lane by lane, taking care to delete any errant keystrokes or misleading data. He would then email out the information to each carrier, taking time to respond to detailed technical questions about the spreadsheet data. Finally, he had to compile all the results, create an algorithm that would compare the carriers on each lane, and award the business.“It was a huge undertaking. It took about four months to do,” Knuth said of the old process. “It was almost a full-time job for that part of the year, every year.”In his new job at IEWC, he sat down with Bid$ense on day one and was amazed at the capabilities. Knuth had never before used a bid tool. SMC³’s latest versions of Bid$ense automate the process even further, taking truckload and LTL RFPs entirely online. The tool draws on RFP best-practices protocols to streamline the bidding communication process, enabling bidding carriers to respond accurately and promptly to shipper requests. The solution also does all the distribution work automatically, electronically submitting shipper bid data to carriers based on their actual service capabilities and performance records. Carriers are alerted with timely prompts for RFP deliverables, so shippers aren’t waiting by the phone for responses.Another benefit of automating the process is the data-cleansing assistance. When Knuth sent spreadsheets to carriers, data errors might cloud the bidding process; he might have to resend data or simply accept a price that did not truly reflect the costs of doing business. Data cleansing is incredibly beneficial, he said.The spreadsheet technique also made bidding analysis an onerous task. Since Bid$ense automates and streamlines the entire RFP process, intensive examination is now simple. SMC³ knows that each bid has more than one best outcome. With uniform responses from each carrier, shippers can quickly rank results and create an unlimited quantity of what-if scenarios to make the optimal procurement decision.Jesse Burnett of Central Garden &amp; Pet experiences many of the same benefits. Founded in 1980, Central Garden &amp; Pet has spent the last three decades growing from a small garden supply company to a provider of a range of products from dog chews and bird seed to soil supplements and natural insecticides. For much of its life, the company shipped these disparate goods via LTL and truckload carriers to retailers throughout the country, relying on each business unit to negotiate directly with their freight transportation providers. This arrangement worked fairly well for a small company, but as Central Garden &amp; Pet expanded, leadership decided to consolidate decision making.Burnett helped centralize the transportation decision making in 2015 with SMC³’s Bid$ense. Before Bid$ense, every business unit operated independently as far as negotiating with carriers.“There were a lot of different things just floating around,” he said. “We didn’t have master agreements in place; no national pricing at all. The pricing from carriers was just all over the place, depending on where you were.”The transformations he saw with Bid$ense were immediate. Burnett has been using the tool about every other year since its implementation at the company. Central Garden and Pet’s $19.6 million 2019 LTL bid saved the company just more than 9 percent when compared to its historical average. For Burnett, though, bid automation extends far beyond savings.“We knew that we weren’t getting the best pricing offer from our carriers just because nothing was centralized,” he continued. “We knew that if we combined everything from all these business units and paired it with one corporate offering, then it would drive some cost benefit with it.”When the company initially decided to centralize bid procurement, executives researched a number of different methodologies and technologies. In the end, though, Burnett found that Bid$ense was both widespread and well known, and that his carrier partners already knew how to use the application. Burnett also highlighted the data-cleansing process as a major benefit, saying the rigorous process ensures that carriers always return the best price.“It definitely has helped drive savings,” he said. “Any time you go out there and you drive that competitiveness with the carriers and they know they’re in a bid environment, it seems to sharpen their pencils.”Transportation procurement is an integral part of the modern supply chain. With Bid$ense, shippers can develop a strategic implementation plan that saves them time and money, but also helps them create strong relationships with their carrier partners. These carriers appreciate the solution’s data-cleansing process; when carriers receive a complete shipment history and future volume forecast, they don’t have to guess on pricing. Carriers that receive more data from shippers get a complete picture of that shipper’s freight, allowing them to accurately plan instead of simply preparing for the worst-case scenario. Clean data presented through an automated system can lead to both bigger shipment savings and a lasting partnership between carrier and customer.Whether customers are looking to streamline over-the-road transportation bidding by automating the RFP process or create an entirely new, centralized sourcing process, Bid$ense has the analytical horsepower to get the job done.SMC³ 2020 Customer Case Study

SMC3rates_shutterstock_5247046.jpg

Shippers save money, time with automated transportation bidding tools

If there’s one immutable truth in the world of logistics, it’s this: LTL is an inherently complex form of transportation. Tariffs, rates, DIM weights, transit times — it’s enough to confuse even seasoned logistics professionals. The solution to this knowledge gap has historically been on-the-job training or university supply chain education, but for a variety of reasons there is now a pressing need for third-party, remote LTL training that prepares logistics workers for transportation success. Global Scope Can Overlook Local Intricacies In the past, professionals looking to move into a supply chain career learned about the basics of supply chain from universities. However, many of these college supply chain programs are now global in scope, focusing on worldwide supply chain management instead of the intricacies of specialized domestic transportation. And even these programs, which used to be widespread, are becoming less common. LTL is not an industry of broad-brush strokes; supply chain professionals really need a pointillistic understanding of the logistics of LTL in order to excel in the industry. Accelerating Need for Dedicated LTL Education This lack of specified training put the onus on employers to prepare new hires with the LTL knowledge needed to do their jobs. Dedicated LTL study is a necessity, not a luxury. At the same time, changes in LTL and the broader supply chain world are accelerating. The reliance on e-commerce has ballooned since the start of the pandemic, and last-mile LTL shipments and related e-commerce strains on the supply chain won’t diminish once social distancing abates. That genie isn’t going back into the bottle. So supply chain employers need logistics workers that are fully versed in all aspects of the industry, ready to solve unique shipping and delivery problems based on their extensive supply chain knowledge But why care about LTL? It’s been reported that some shippers in today’s world are no longer concerned with what mode is used to ship their goods. A Multimodal Approach Ensures On-Time Delivery This mode agnosticism means supply chain stakeholders have to be well versed in all modes of transportation. As unforeseen weather events and other disruptions, such as protests, become more common, savvy logistics employees will need to be armed with familiarity of all modes, not just the most popular, to ensure that freight is delivered on time, without damage, and in the most financially expedient way possible. Offerings like SMC³’s LTL online education courses cover a wide range of topics from LTL basics and operations to more advanced concepts like pricing analytics and transportation law. The company also has plans to continually refresh content, adding new expert presenters and taking the feedback of students to make the courses even better as time goes on. Learn more about&nbsp;<a href="https://logisticstrainingcenter.com/smc3-courses/" rel="noreferrer" class="joc_admin__link">SMC³’s LTL Online Education program</a>&nbsp;and view the 2021 hybrid schedule, featuring live industry experts,&nbsp;<a href="https://www.smc3.com/onlinelearning2021/" rel="noreferrer" class="joc_admin__link">here.</a>

SMC3rates_shutterstock_5247046 (1).jpg

Filling the Supply Chain Education Gap with LTL Education Courses

UPGRADE TO GOLD AND SAVE: Use code GTW695 at checkout and save $800 on first year of a Gold subscription!

Upgrade Subscription

SUBSCRIBE AND SAVE: Use code STSW20 at checkout to save 20% on first year of any annual subscription!


Subscribe Now - Free Trials - Offer Box

GET INTO A GROUP SUBSCRIPTION: Arm your team with unlimited Journal of Commerce content

Group Subscriptions - Offer Box

Group Subscriptions

UPGRADE AND SAVE: Use code GUW795 at checkout and save $700 on first year of a Gold subscription! 

Upgrade Subscription - Offer Box

SUBSCRIBE TODAY: Choose a subscription plan that works best for you!

Subscribe Now - Anonymous - Offer Box

Subscribe Today

START A FREE TRIAL: Access Journal of Commerce content for 30 days

Free Trial - Offer Box

Free Trial

Monthly publication providing an editorial deep dive into global supply chain news

Journal of Commerce Magazine - Rectangle Box

Journal of Commerce Magazine

An in-depth analysis of transport trends in the multipurpose and heavy-lift fleet segment

Breakbulk Report - Rectangle Box

Breakbulk Quarterly

Customers scoring their intermodal partners to identify the best service providers

Intermodal Service Scorecard - Rectangle Box

Intermodal Service Scorecard

A must-attend conference for shippers & logistics providers moving goods inland

Inland Conference - Rectangle Box

Attend Inland25

A premium access index of savings using domestic intermodal vs. OTR 

ISI Report - Rectangle Box

Intermodal Savings Index

An extensive dashboard of charts organized by trade lane, mode, and topic

Gateway - Rectangle Box

Gateway

A premium access outlook critical to shippers and transportation providers

QI Report - Rectangle Box

Quarterly Intelligence

Discover the news and analysis of supply chain strategies, sourcing and trends covered by the Journal of Commerce. Comprehensive coverage includes customs, trade news, transport news and the latest information about trade regulations.

Stay informed with the latest regulation news and trade updates. Explore comprehensive transportation news and trade regulations today.

Transport, Trade and Regulation News | Journal of Commerce

The Journal of Commerce’s supply chain news and analysis impacting the management of end-to-end supply chains reports on supply chain strategies, cargo visibility, inventory trends, sourcing, customs certification and contract logistics. Supply chain news coverage also delves into refrigerated shipping advancements and management of inventory status, regulatory updates and government funding projects.

Our logistics technology news include logistics technology startups, solutions, and the impact of technology on logistics and supply chain management.

Logistics Technology News | Journal of Commerce

Logistics Technology News

A thorough cool cargoes news by Journal of Commerce. Learn about the latest trends in refrigerated cargo transportation, weight capacity, technology, and more.

Cool Cargo News | Journal of Commerce

Cool Cargo News

Journal of Commerce keeps you informed on the latest last mile news with comprehensive coverage of carriers, logistics, and last mile transportation solutions.

Last Mile News | Journal of Commerce

Last Mile News

Discover the latest industrial real estate news and trends. Covering projects, real estate supply chain, logistics, pricing, cross dock facilities, and more.

Industrial Real Estate News | Journal of Commerce

Industrial Real Estate News

Stay updated on supply chain strategies, cargo visibility, inventory trends and more with our comprehensive supply chain news and analysis.

Latest News

More News & Analysis

Growing project cargo scale testing transport limitations, but driving innovation

Maersk’s contract logistics business adds New Jersey warehouse

MSC juggles India-Europe network rotations amid Asia cargo rush